|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I was having a hard time finding the problem with this Mackie 1604 unit. I didn't have a schematic. Went looking on the web and found your site and the price was more then reasonable. Ordered it and within the hour had the manual and within 15 minutes had the unit fixed. Best $4.99 I ever spent. Thank you.
Doug
;
This is a service manual in every sense of the word ( French and German versions of the text are included, as well as English..)
There are explanations of the mechanical and electrical functions, plenty of mechanical drawings, and the needed schematics. The quality of the scanning is excellent - all the component values are clearly legible - and very usefully there are pcb component layouts, so you can find a component on the schematic, and then very quicky pinpoint its physical location on the relevant pcb.
I cannot see how I can give this manual any less than the maximum 5 stars! Great value for money, which will pay for itself immediately. Excellent all round!
;
the manual is great and especially hard to find... thanks for the great service and having a hard to find manuel_
;
Please tell us what you think and share your opinions with others. Be sure to focus your comments on the product. You will receive $2.50 of store credit for Your review.
;
hat alles sehr gut geklappt. Das Servicemaual ist gut zu verwenden. Die Pläne und Schrift
ist klar und leserlich. Außerdem preiswert. Grüße an alle Hifi-Bastler
VERTÄ°CAL DEFLECTION CIRCUIT DEFECTS
There is a horizontal line on the screen
Check 16 VDC at pin 3 of IC501.
NO
Check and replace R127 (at pin 20 of IC101), C126 (at pin 21 of IC101), R526, D513, C527, R521.
YES
Check 35 VDC at pin 6 of IC501.
NO
Flyback lines are visible. Check and replace R527, D512, C526, R522, C517.
YES
Check 2.2 VDC at pin 1 of IC501.
NO
If R122 is open IC501 becomes defective and 16 VDC components fail. Check them before replacing IC501.
YES
Check 2.2 VDC at pin 2 of IC501.
NO
Lower half of the screen is black. Check and replace R123 and IC101.
YES NO
Check 7.4 VDC at pin 7 of IC501. Check 7.2 VDC at pin 4 of IC501.
A Horizontal line is visible. Check and replace R518, R519 and IC501.
YES
Replace IC501
|
|
|
> |
|
